-
![Is there a difference between COP and COC materials?]()
Is there a difference between COP and COC materials?
万彩网100线路 COP and COC basically belong to the same material at the raw material sales end, and they are very similar. Specifically look at the brand identification and parameters.COP (Cyclic Olefin Polymer) and
2024/01/27 COP and COC materials
-
![Advantages and disadvantages of PPS materials]()
Advantages and disadvantages of PPS materials
PPS (polyphenylene sulfide) is a kind of high performance engineering plastic with special properties. Here are some advantages and disadvantages of PPS materials:The specific gravity of PPS material
2024/01/25 PPS
-
![Advantages and disadvantages of PS plastic]()
Advantages and disadvantages of PS plastic
万彩网100线路 PS plastic is short for Polystyrene. This plastic has the following advantages and disadvantages:The specific gravity of PS material is 1.05 g/cm ³, the shrinkage rate is usually between 0.6% and 0.8%
2024/01/25 PS plastic
-
![Advantages and disadvantages of PPO plastics]()
Advantages and disadvantages of PPO plastics
PPO (Polyphenylene Oxide or Polyphenylene Ether) is an engineering plastic. It is often blended with other plastics such as high impact polystyrene (HIPS) to improve processability and reduce costs, a
2024/01/08 PPO-Plastic raw material
-
![Injection molding process of ABS material]()
Injection molding process of ABS material
ABS (acrylonitrile-butadiene-styrene copolymer) is a common thermoplastic polymer that is widely used in injection molding to produce a variety of plastic parts and products. ABS plastics are known fo
2024/01/07 Injection molding process
-
![What is precision injection mold]()
What is precision injection mold
万彩网100线路 Precision injection mold is a kind of mold for manufacturing high-precision injection products. It is commonly used in the production of small and medium-sized parts in materials such as plastics, rub
2023/12/28 Precision mold
-
![Advantages and disadvantages of PC+ABS alloy material]()
Advantages and disadvantages of PC+ABS alloy material
PC+ABS is a thermoplastic engineering plastic commonly used in injection molding. It is a blend of Polycarbonate (PC for short) and Acrylonitrile Butadiene Styrene (ABS for short). The material combin
2023/12/26 Injection molding
-
![Injection molding process and principle]()
Injection molding process and principle
万彩网100线路 Injection molding is a complex manufacturing process that involves converting a thermoplastic from its solid state to a liquid state (melting), which is then injected into a mold, cooled and cured, an
2023/12/17 Injection molding
